Many customers who buy a five axis machining center will ask, how to debug the five axis machining center, can you package the installation? These problems are not a problem for cloud carving five axis engraving machine manufacturers, because we will assign special personnel to guide the whole process. So you can find out if you are still worried.

先來了解什么是五軸加工，五軸加工是用主軸轉動來完成切削加工，使工件在外形精度、位置精度、以及工件的外表面都能完全性的生產加工等多方面到達運用要求的一種切削加工方法。五軸加工不是單純的將車削和銑削兩種加工手段兼并到一臺機床上，而是應用五軸加工的主軸運動來實現各類模具或板材、家具的生產加工，是在現在的數控技術得到較大發展的條件下發生的一種新的切削實踐和切削技巧。

Let's first understand what is the five axis machining center. The five axis machining center is a cutting method that uses the spindle rotation to complete the cutting processing, so that the workpiece can meet the application requirements in many aspects, such as shape accuracy, position accuracy, and the complete production and processing of the outer surface of the workpiece. The five axis machining center does not simply merge turning and milling into a machine tool, but uses the spindle motion of the five axis machining center to realize the production and processing of various molds, plates and furniture. It is a new cutting practice and cutting skill under the condition that the current NC technology has been greatly developed.

五軸加工到達工廠后，必須根據基礎圖制作所需的基礎，足以支持五軸加工的水平度和堅固性。鋼筋混凝土的厚度應約為50厘米。除了預先準備具有足夠負載能力的叉車之外，還必須有一個特殊的吊具或足夠強度的鋼絲繩。室內溫度對五軸加工的加工精度有一定影響。如果是更精確的工件加工，則需要管理室溫以獲得理想的加工精度。五軸加工環境溫度通常在10°和40°之間，濕度為75％。當五軸加工加工精度要求在0-10um之間時，建議的溫度范圍控制在23°。

After the five axis machining center arrives at the factory, the required foundation must be made according to the foundation drawing to support the levelness and firmness of the five axis machining center. The thickness of reinforced concrete shall be approximately 50 cm. In addition to preparing forklifts with sufficient load capacity in advance, there must also be a special spreader or steel wire rope of sufficient strength. The indoor temperature has a certain influence on the machining accuracy of five axis machining center. If the workpiece is processed more accurately, the room temperature needs to be managed to obtain the ideal machining accuracy. The ambient temperature of five axis machining center is usually between 10 ° and 40 ° and the humidity is 75%. When the machining accuracy of the five axis machining center is required to be between 0-10um, the recommended temperature range is controlled at 23 °.

使用五軸加工進行零件加工時，應根據零件的加工要求進行系統編程工作。編程過程完成后，應執行工具設置和試切，以防止程序錯誤和工具錯誤。在碰撞事故中，我們應該讓五軸加工進行空行程模擬處理。在五軸加工的坐標系中，刀具的總長度向右移動2——3次;然后開始模擬處理，并在模擬完成后完成模擬過程。該工具是正確的，零件是五軸加工加工的。

When machining parts with five axis machining center, system programming shall be carried out according to the machining requirements of parts. After the programming process is completed, implement tool setting and trial cutting to prevent program errors and tool errors. In the collision accident, we should let the five axis machining center carry out empty stroke simulation. In the coordinate system of the five axis machining center, the total length of the tool moves to the right 2-3 times; Then start the simulation process and complete the simulation process after the simulation is completed. The tool is correct and the parts are processed by five axis machining center.