As we all know, engraving machine, cutting machine, woodworking engraving machine, three-dimensional engraving machine, aluminum engraving machine, wood engraving machine, wood door processing, woodworking processing and five axis processing often encounter various problems and problems in daily use, and maintenance is also very troublesome. If you want to keep all parts of the engraving machine in good condition, Regular maintenance of the machine is very important. It can eliminate many hidden troubles in the bud and prevent malignant accidents. The daily maintenance requirements of different models of engraving machines are not exactly the same, but generally speaking, they include the following aspects:

1、機器要放置在干燥通風好的地方（防止暴曬）

1. The machine shall be placed in a dry and well ventilated place (to prevent exposure to the sun)

2、機器配置一臺可靠穩壓器，保證地線接地

2. The machine is equipped with a reliable voltage regulator to ensure grounding

3、盡量不用上網電腦輸出文件到雕刻機

3. Try not to use the Internet to output files to the engraving machine

4、機器每隔一個月要保養一次（在絲桿上加適量的潤滑油）

4. The machine shall be maintained every other month (add an appropriate amount of lubricating oil on the screw rod)

5、控制箱要放置在通風良好的地方，不能置于高溫地帶工作

5. The control box shall be placed in a well ventilated place and shall not be placed in a high temperature area

6、在一定時間內檢查一下雕刻機線路是否有松動

6. Check whether the circuit of the engraving machine is loose within a certain time

7、不要在雕刻機臺面或機頭放置雜物（帶有磁性材料、超重量物品、液體）

7. Do not place sundries (with magnetic materials, overweight objects, liquids) on the table or head of the engraving machine

8、不要讓機器常時間在雕刻機臺面的同一角落工作（以防絲桿、導軌常時間沒與橫梁接觸而不能合理潤滑）

8. Do not let the machine work at the same corner of the engraving machine table for a long time (in case the screw rod and guide rail do not contact the beam for a long time and cannot be reasonably lubricated)

9、保持良好的潤滑狀態，定期檢查、清洗絲杠，添加或更換油脂油液，使絲杠、螺母等各運動部位始終保持良好的潤滑狀態，以降低機械的磨損速度。

9. Maintain good lubrication status, regularly check and clean the lead screw, add or replace grease and oil, so as to keep all moving parts such as lead screw and nut in good lubrication status, so as to reduce the wear speed of machinery.

電腦和控制箱如果太臟，粉塵太多，會影響雕刻機的正常運行?？刂葡淅锾K，有可能發生短路現象燒壞驅動器。定期進行清掃衛生，保持主板和各類卡的通風干燥。

If the computer and control box are too dirty and dusty, it will affect the normal operation of the engraving machine. If the control box is too dirty, there may be a short circuit and burn out the driver. Clean regularly and keep the main board and all kinds of cards ventilated and dry.

主軸電機的保養

Maintenance of spindle motor

為了能夠更長、更穩定地使用主軸電機，應注意以下幾點：

In order to use the spindle motor longer and more stably, pay attention to the following points:

1、三天換一次水 2．定期加油3、保持軸承潤滑  4、不能有水進入電機

1. Change the water once every three days 2. Add oil regularly 3. Keep the bearing lubricated 4. No water can enter the motor

5、保持軸承的清潔 6、可在高轉速、強阻力的情況下長期工作。

5. Keep the bearing clean. 6. It can work for a long time under the condition of high speed and strong resistance.

以上就是四工序開料機http://editscore.net/為大家介紹的內容，感謝您在百忙之中查看我公司的信息內容，如果您想要了解的更多，歡迎您來電進行咨詢!

The above is the four process cutting machine http://editscore.net/ Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!