亚洲中文久久精品无码软件 ,BBWBBWBBW少妇毛茸茸

聯系我們

18560023440

王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間

新聞資訊

保麗龍雕刻機生產廠家主軸的選擇

來源：http://editscore.net 時間：2020-09-30

眾所周知，保麗龍雕刻機一般都配備了高性能主軸來發揮其作用。主軸可用于高速雕刻，鉆孔和銑削，鉆孔等。當泡沫雕刻機的主軸高速旋轉時，會產生大量熱量。如果熱量沒有及時冷卻，會對主軸的使用壽命產生很大影響，甚會燒壞主軸。泡沫雕刻機的主軸有兩種主要的冷卻方法，包括水冷和空氣冷卻。但是主軸需要什么樣的冷卻方法？

As we all know, styrofoam engraving machines are generally equipped with high-performance spindle to play its role. Spindle can be used for high speed engraving, drilling and milling, drilling, etc. When the spindle of the foam carving machine rotates at high speed, a lot of heat will be generated. If the heat is not cooled in time, it will have a great impact on the service life of the spindle, and even burn out the spindle. The spindle of the foam carving machine has two main cooling methods, including water cooling and air cooling. But what kind of cooling method is needed for the spindle?

保麗龍雕刻機主軸的選擇。使用水冷主軸或風冷主軸更好嗎？許多需要購買保麗龍雕刻機的客戶將面臨這個問題。下面小編就對于這個問題進行解答：

The selection of main shaft of styrofoam engraving machine. Is it better to use water-cooled spindle or air-cooled spindle? Many customers who need to buy styrofoam engraving machines will face this problem. The following section will answer this question:

1.保麗龍雕刻機的冷卻效果。水冷方法采用水循環冷卻主軸。水循環后主軸溫度保證在40度以下，其冷卻效果遠優于水冷方式。

1. Cooling effect of styrofoam engraving machine. The main shaft is cooled by water circulation. After water circulation, the temperature of the main shaft is kept below 40 ℃, and its cooling effect is far better than that of water cooling.

2.保麗龍雕刻機的噪音。水冷主軸電機基本上沒有噪音，與水冷相比，風冷主軸電機噪音較大。

2. The noise of styrofoam carving machine. The water-cooled spindle motor has no noise basically. Compared with water-cooled spindle motor, the noise of air-cooled spindle motor is larger.

3.保麗龍雕刻機的使用壽命。水冷主軸可以通過人為因素延長使用壽命，如換水或使用工業水冷卻器，因此其使用壽命比風冷主軸長。

3. Service life of styrofoam engraving machine. The service life of water-cooled spindle can be prolonged by human factors, such as changing water or using industrial water cooler, so its service life is longer than that of air-cooled spindle.

4.保麗龍雕刻機的準確性。水冷主軸的軸向和徑向跳動基本上低于0.003 mm，其精度高于空冷主軸。

4. Accuracy of styrofoam engraving machine. The axial and radial runout of the water-cooled spindle is basically less than 0.003 mm, and its accuracy is higher than that of the air-cooled spindle.

5.保麗龍雕刻機易于使用。由于水冷卻主軸需要連接到水泵，因此需要一個水桶來保持水。它需要連接到水管。特別是在北方的寒冷冬季，水管容易結冰，這對于寒冷的冬天的顧客來說可能更麻煩。此時，風冷主軸更合適。

5. The styrofoam carving machine is easy to use. Since the water cooling spindle needs to be connected to the water pump, a bucket is needed to hold the water. It needs to be connected to a water pipe. Especially in the cold winter in the north, water pipes are easy to freeze, which may be more troublesome for customers in cold winter. At this time, the air-cooled spindle is more suitable.

在選擇冷卻方法時，建議考慮購買預算以及當?shù)刈匀粭l件，如當?shù)厮Y源，溫度和其他因素。當然，您也可以根據您的具體需求與我們聯系，以獲得建議。

When selecting the cooling method, it is recommended to consider the purchase budget and local natural conditions such as local water resources, temperature and other factors. Of course, you can also contact us according to your specific needs for suggestions.
關鍵詞：保麗龍雕刻機