聯系我們
18560023440
王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間
業內資訊
石材雕刻機的刀頭有哪些?
來源：http://editscore.net 時間：2020-10-14
石材雕刻機是一種能夠在天然石材、玻璃、陶瓷上進行字畫雕刻的高科技全自動電腦控制雕刻設備。石材的材質較硬，且質地也不一樣，因此雕刻不同的石材，需要用到不同的刀具。下面小編簡單介紹下石材雕刻機的刀頭有哪些。
Stone engraving machine is a kind of high-tech fully automatic computer-controlled engraving equipment which can carve calligraphy and painting on natural stone, glass and ceramics. Stone material is hard, and the texture is not the same, so different cutting tools are needed to carve different stones. The following small series of a simple introduction to the stone carving machine under what the head.
石材雕刻機的種類：
Types of stone carving machine:
1、冶熔金剛石磨頭刀：冶熔金剛石磨頭刀，采用軍工高科技"冶熔金剛石技術"制造。具有鋒利度好，雕刻效率高，刀頭不變形，雕刻精度高等特點。因此，雕刻大理石，青石，砂巖等材質時，常常作為率浮雕的較常選的刀具，亦是刻大字的利器。
1. Melting diamond grinding head cutter: melting diamond grinding head cutter is manufactured by military high-tech "melting diamond technology". It has the advantages of good sharpness, high carving efficiency, no deformation of cutter head and high carving accuracy. Therefore, when carving marble, lapis lazuli, sandstone and other materials, they are often used as high-efficiency relief tools, and are also sharp tools for carving large characters.
2、PCD聚晶金剛石刀：采用進口聚晶金剛石刀片，質量遠非廉價國產刀片可比，采用真空焊接技術，刀片不損傷不脫落；顯微研磨技術使得刀刃的鋒利度，強度得到較優化。一般用來刻花崗巖小字，硬度好，壽命高，雕刻效果好，使用時，應該注意柔性走刀，不可下刀過猛。
2. PCD polycrystalline diamond cutter: the imported polycrystalline diamond blade is far from cheap in quality, and the domestic blade is comparable. The vacuum welding technology is used to ensure that the blade does not damage or fall off; the micro grinding technology optimizes the sharpness and strength of the cutting edge. It is generally used to carve granite small characters. It has good hardness, high service life and good carving effect. When using it, you should pay attention to flexible cutting, and do not cut too hard.
3、普通刀型合金刀：采用高性能合金材質，雙刃設計，鋒利度好，性價比高，手工重磨容易，但是這種刀型由于角度不標準（刀尖處有另外一個較大的角度），不適合做浮雕，一般用于雕刻青石，大理石。
3. Common blade type alloy knife: high performance alloy material, double blade design, good sharpness, high cost performance, easy manual regrinding. However, due to the non-standard angle (there is another large angle at the blade tip), it is not suitable for relief carving. It is generally used for carving bluestone and marble.
4、標準角度合金刀：采用高性能合金材質，雙刃設計，角度標準，刻字，精細浮雕效果都好。一般用于雕刻青石，大理石?？啥ㄗ瞿ブ瞥蓭降椎钠降准獾?。
4. Standard angle alloy knife: high performance alloy material, double blade design, angle standard, engraving, fine relief effect is good. Generally used for carving bluestone and marble. It can be customized and ground into flat bottomed sharp knife.
5、整體合金三棱刀：整體合金三棱刀采用超微粒超耐磨合金，耐磨性遠高于市面上其它三棱刀，角度標準，刻字效果好！有磨刀機的客戶，可用此刀。
5. Integral alloy trilateral cutter: the whole alloy trilateral cutter is made of ultra-fine particles and super wear-resistant alloy. Its wear resistance is much higher than other three edge knives on the market. The angle is standard and the engraving effect is good! This knife is available for customers who have universal grinder.
以上列出了5種類型的石材雕刻機的刀頭，供大家參考。石材加工雕刻機主要是針對石材的刻字、浮雕、陽雕、陰雕、線雕、切割、鏤空,每一種不同的加工工藝對于雕刻刀具的選擇是關重要的,刀具的選擇錯誤會造成加工質量的不足，還有刀具的壽命也會大大縮短。
The cutter heads of five types of stone carving machine are listed above for your reference. Stone processing engraving machine is mainly aimed at engraving, relief, Yang carving, Yin carving, line carving, cutting and hollowing out of stone. Each different processing technology is very important for the selection of carving tools. The wrong selection of cutting tools will cause the shortage of processing quality, and the service life of cutting tools will be greatly shortened.
