午夜男欢女爱免费视频,国产精品99久久久精品无码,97久久综合亚洲色HEZYO

聯系我們

18560023440

王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間

新聞資訊

石材雕刻機廠家哪家好？

來源：http://editscore.net 時間：2020-10-20

石材雕刻機廠家哪家好？隨著市場對雕刻機在機械設備行業飛速發展，也出現了很多大中小型石材雕刻機廠家，產品質量和服務水平也是各有不同。那么，在眾多的廠家中，石材雕刻機廠家哪家好呢?

Stone carving machine manufacturers which good? With the rapid development of engraving machine in the machinery and equipment industry, there are many large, medium and small stone carving machine manufacturers, product quality and service level are also different. So, in many manufacturers, stone carving machine manufacturers which good?

要說雕刻機廠家哪家好，可以從以下幾個方面綜合的考慮下：

If you want to say which engraving machine manufacturer is good, you can consider it comprehensively from the following aspects:

一、床身及龍門。床身現在多為鋼結構，龍門分鑄鋁和方鋼兩種結構。床身及龍門結構及尺寸大小直接決定機床的重量。從一定程度上講重量越重了越好，因為重量重就代表了穩定性好，直接影響到加工精度!

1、 Bed and gantry. Now the bed is mostly steel structure, the gantry is divided into cast aluminum and square steel structures. Machine bed and gantry structure and size directly determine the weight of the machine tool. To a certain extent, the heavier the weight, the better, because the weight represents good stability, directly affecting the processing accuracy!

二、主軸及功率。主軸從工作方式上講分水冷卻和風冷卻兩種。使用壽命風冷比水冷要長，但成本要高。

2、 Spindle and power. The spindle can be divided into water cooling and wind cooling. The service life of air cooling is longer than that of water cooling, but the cost is higher.

石材雕刻機

三、吸附裝置。批量化生產比T型槽臺面(壓板壓)有效的提率，節省裝夾時間。

3、 Adsorption device. Compared with T-groove table (pressing plate), mass production can effectively improve efficiency and save clamping time.

四、吸塵裝置。加工木質材料，粉塵特別嚴重，太臟的話對機床使用壽命或造作人員不益，建議使用。

4、 Dust collection device. When processing wood materials, the dust is very serious. If it is too dirty, it will not benefit the service life of the machine tool or the craftsmen. It is recommended to use it.

五、傳動系統。木工機多為齒條+線性導軌傳動。齒條保證設備的速度(空程及加工速度)，線性導軌(方軌)直線性好，保證了加工精度。傳動系統在整個機床的地位尤為重要，一定程度上決定了機床的性能。

5、 Transmission system. Most woodworking machines are driven by rack and linear guide rail. The rack ensures the speed of the equipment (idle distance and processing speed), and the linear guide rail (square rail) has good linearity, which ensures the machining accuracy. The position of transmission system in the whole machine tool is particularly important, which determines the performance of the machine tool to a certain extent.

六、控制方式。分DSP手柄控制和電腦連接式兩種。手柄控制使工作時操作更便捷，但較聯機式比缺點使用壽命短，只顯示設備運動坐標不顯示加工軌跡，而電腦可完全顯示仿真加工軌跡及運動坐標。

6、 Control mode. It is divided into DSP handle control and computer connection. The handle control makes the operation more convenient, but it has shorter service life than the on-line one. It only displays the motion coordinates of the equipment, but does not display the processing track, while the computer can completely display the simulation processing track and motion coordinates.

七、維護與保養。分全自動潤滑系統(軟件控制)和半自動潤滑系統(人工控制)兩種。

7、 Maintenance. It is divided into automatic lubrication system (software control) and semi-automatic lubrication system (manual control).

八、工作電壓。正常情況下額定電壓為380v/50HZ，特殊情況可更改為220V/50HZ.

8、 Working voltage. The rated voltage is 380V / 50Hz under normal conditions, but it can be changed to 220 V / 50 Hz under special conditions

九、驅動系統 。分步進系統和伺服系統，步進系統是開環控制，扭矩小，精度差。伺服系統(采用閉環控制，扭矩大精度高)

9、 Drive system. Step system and servo system, step system is open-loop control, small torque, poor accuracy. Servo system (closed loop control, high torque and high precision)

十、軟件。分控制軟件和編程軟件，控制軟件如：維宏，臺灣寶元、新代較成熟。編程軟件：國內文泰、精雕等;國外：法國TYPE3,英國：Artcam等

10、 Software. Control software includes control software and programming software. Control software such as Weihong, Taiwan Baoyuan and Xindai are more mature. Programming software: domestic Wentai, Jingdiao, etc.; abroad: French type3, UK: ArtCAM, etc

十一、選擇好相應的配置后就該比較價位了，也就是性價比

11、 After selecting the appropriate configuration, it is time to compare the price, that is, cost performance

十二、售后服務。好的售后服務尤為重要，可從企業，地域，廠家是否是具有生產培訓實力來考察!

12、 After sales service. Good after-sales service is particularly important, can be from the brand, region, whether the manufacturer has production training strength to investigate!

石材雕刻機廠家哪家好? 選擇墨源數控，專注的技術服務團隊，為您量身定做，打造的應用解決方案，專門的生產制造隊伍為您提供速度快、精度高、長期使用下高穩定性的可靠雕刻機設備!

Which stone engraving machine manufacturer is good? Choose ink source numerical control, dedicated technical service team, tailor-made for you, create efficient application solutions, special production team to provide you with fast, high precision, high stability under long-term use of reliable engraving machine equipment!