免费观看MV大片的APP,成人免费a级毛片无码网站入口,美女脱精光让男生桶下面

聯系我們

18560023440

王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間

新聞資訊

保麗龍雕刻機的操作擁有哪些功能？

來源：http://editscore.net 時間：2020-10-22

使用過保麗龍雕刻機的用戶應該都知道它的功能是非常的強大的，如果大家沒有感受到它的功能的話那么應該是哪里出現了差錯。不過對于很多沒有使用過的人來說，保麗龍雕刻機的功能可能還不是很清楚，不如先看一看下面文章中的介紹吧。

Users who have used the styrofoam engraving machine should know that its function is very powerful. If you don't feel its function, then there should be something wrong. However, for many people who have not used it, the function of the styrofoam carving machine may not be very clear. It is better to take a look at the introduction in the following article.

我們?cè)诒｛慅埖窨虣C(jī)雕刻過程中出現的一些小問題，比如突然斷電、定位不當、未設置路徑、中途有事離開等問題，我們都可以通過模具雕刻機線路板來解決，保麗龍雕刻機也可以與斷點續雕功能配合，繼續雕刻。這樣既省時省力，還能按時按質按量的完成。

We can solve some small problems in the engraving process of the styrofoam engraving machine, such as sudden power failure, improper positioning, no path setting and leaving on the way. We can solve these problems through the circuit board of the mold engraving machine. The styrofoam engraving machine can also cooperate with the breakpoint continuous carving function to continue carving. This not only saves time and effort, but also completes on time according to the quality and quantity.

1.斷點續雕

1. Break point continuation

從任意百分比開始雕刻，保麗龍雕刻機到某一百分比結束?？梢噪S時停止雕刻，下一次開機選擇百分比繼續雕刻。

Starting from any percentage of engraving, styrofoam engraving machine to a certain percentage of the end. You can stop engraving at any time and select the percentage to continue engraving next time.
保麗龍雕刻機

2.虛擬加工

2. Virtual machining

根據設定的參數，虛擬顯示實際加工過程。可以預先觀察到加工效果，提前作出判斷。

According to the set parameters, the virtual display of the actual processing process. The processing effect can be observed in advance and the judgment can be made in advance.

3.實時顯示加工路徑

Real time processing path display

加工前顯示所有加工路徑，在加工過程中實時顯示當前位置。我們可以觀察到實際雕刻情況，以方便我們作出正確的判斷。

All machining paths are displayed before machining, and the current position is displayed in real time during machining. We can observe the actual carving situation to facilitate us to make a correct judgment.

4.自動關閉主軸

4. Turn off the spindle automatically

完成某項功能后自動關閉主軸。對于一些較大的線路板，若需要中途離開，可選擇在完成后自動關閉主軸電機。

After completing a function, the spindle is automatically closed. For some large circuit boards, if you need to leave midway, you can choose to turn off the spindle motor automatically after completion.

5.自動原點定位

5. Automatic origin positioning

可以從任意位置自動回到設定的零點?？梢栽诎惭b好敷銅板，調整好雕刻刀位置后，設定零點，以后無論經過怎樣的操作，總能方便的回到加工位置。

It can automatically return to the set zero point from any position. You can set the zero point after installing the copper clad plate and adjusting the position of the engraving knife. No matter what kind of operation, you can always return to the processing position conveniently.

6.任意區域選擇雕刻

6. Select carving in any area

選擇任意區域，進行雕刻。若因?yàn)榘迕娌黄降纫蛩?，造成線路板部分區域雕刻不到位，可以使用此功能對某個區域重新雕刻。

Select any area to carve. If the engraving is not in place due to the uneven board surface, you can use this function to re carve a certain area.

7.組合雕刻

7. Combination carving

選擇兩把雕刻刀，自動分配雕刻區域。在不影響雕刻精度的情況下，選擇一把大雕刻刀，快速銑掉大塊的空白區域。

Select two engraving knives to assign engraving area automatically. In the case of not affecting the carving accuracy, select a large engraving knife to quickly mill out the large blank area.

8.定位孔與定位銷

8. Locating hole and locating pin

提前打定位孔，重新安裝時使用定位銷，既保證精度，又方便安裝。線路板取下后很難通過肉眼重新安裝到位，采用定位銷以后，重新安裝會方便的多。配合自動原點定位功能使用，效果更好。

The positioning hole should be drilled in advance and the positioning pin should be used when re installing, which not only ensures the accuracy but also facilitates the installation. It is difficult to re install the circuit board in place by naked eyes after removing it. It will be more convenient to re install the circuit board after using the positioning pin. With the automatic origin positioning function, the effect is better.

這些內容都是對模具雕刻機功能的分享，希望大家在之后使用的過程中可以正確使用操作，如有問題可以咨詢我們公司或者關注公司網站：http://editscore.net。

These contents are the sharing of the functions of the mold engraving machine. I hope you can use and operate correctly in the process of using. If you have any questions, you can consult our company or follow the company website: http://editscore.net 。
關鍵詞：保麗龍雕刻機