How much is the price of a styrofoam engraving machine? This is one of the problems that many customers are very concerned about. In fact, the price of styrofoam engraving machine will be affected by many factors, such as power, beam, etc

保麗龍雕刻機的主要是由以下幾種因素影響的：

The price of styrofoam engraving machine is mainly affected by the following factors:

1、雕刻機的功率大小。因為木材質的硬度比較大，一般來說木工雕刻機都需要配置功率大一些的主軸電機，功率越大，也會相應增加。

1. The power of engraving machine. Because the hardness of wood is relatively large, generally speaking, woodworking engraving machines need to be equipped with spindle motors with higher power. The higher the power, the higher the price will be.

2、雕刻機的橫梁，市場上的雕刻機有的是用鋼的，有的是用鋁的，差別也很大。

2. The beam of engraving machine, the engraving machine on the market, some are made of steel, some are made of aluminum, the price difference is also very big.

保麗龍雕刻機

Styrofoam carving machine

3、從傳動方式來說，雕刻機分為絲桿機和齒條機，齒條機的比絲桿機貴太多，絲桿機一般用在廣告行業，做紅木家具的也建議選擇這種機型，而齒條機呢，傳動速度比較快，一般用于切割，木門加工等等，并不是說齒條機不適合做廣告行業，而是用齒條機做廣告行業，性價比不大，有點大材小用。絲桿機三軸是絲桿傳動，齒條機軸是齒條傳動，齒條機是雙驅動。

3. In terms of transmission mode, engraving machine is divided into screw rod machine and rack machine. The price of rack machine is much higher than that of screw rod machine. Screw rod machine is generally used in advertising industry, and mahogany furniture manufacturers also suggest choosing this type of machine. However, rack machine has a relatively fast transmission speed and is generally used for cutting and wood door processing. It is not said that rack machine is not suitable for advertising industry, but is widely used It's not cost-effective. It's a bit overkill. The three axis of screw machine is driven by screw rod, the shaft of rack machine is rack drive, and rack machine is double drive.

4、雕刻機的床身，主要分槽鋼、方管、鑄鐵的三種，一般熟悉這種設備的都知道鑄鐵的床身好，其實如果方管的是加厚的話，成本比鑄鐵的還高，穩定性比鑄鐵的也好，需要具體分析。

4. Engraving machine bed, mainly divided into channel steel, square tube, cast iron three kinds, generally familiar with this equipment know that cast iron bed is good, in fact, if the square tube is thickened, the cost is higher than that of cast iron, and the stability is better than that of cast iron, which needs specific analysis.

5、如果同樣是齒條機，差別也是很大，這就得從雕刻機的每個部件來對比，比如說主軸，一般分為水冷和風冷的，而且根據牌子的不同也不同。綜上所述，石材雕刻機因企業、功率等方面的原因，會導致它的有很大區間的浮動。在選擇的時候可以綜合考慮各方面來挑選。

5. If the rack machine is the same, the price difference is also very big. This has to be compared from each part of the engraving machine. For example, the main shaft is generally divided into water-cooled and air-cooled, and the prices vary according to different brands. To sum up, stone carving machine due to brand, power and other reasons, will lead to its price has a large range of fluctuations. When choosing, we can consider all aspects to choose.