In the process of woodworking engraving machine, because of the working characteristics of water-cooled spindle. The engraving machine spindle will be blocked. As the engraving machine spindle motor is water-cooled spindle, it must rely on internal circulating water to cycle repeatedly, in order to achieve the purpose of reducing the heat of the spindle motor in the working process. So that the engraving function can work normally and stably. If the main shaft of engraving machine is not replaced with cooling water in time, it will lead to high heat production of the main shaft of engraving machine, which will reduce the engraving accuracy, and even lead to step loss and dislocation.

所以雕刻機主軸電機如果出現堵了的情況，應該及時解決。，可以接上氣泵吹下，將水管內的雜物，堵塞物，試著吹出。如果吹不出，也可以用稀釋的酸液浸泡下，將堵塞物軟 化后，再用高壓水槍吹下，將里面的水垢和雜質吹出。

So if the engraving machine spindle motor is blocked, it should be solved in time. First of all, you can connect the air pump to blow down and try to blow out the debris and blockage in the water pipe. If it can not be blown out, it can also be soaked in diluted acid to soften the blockage, and then blow it down with a high-pressure water gun to blow out the scale and impurities inside.

木工雕刻機主軸既然容易堵塞，那么平時雕刻機用戶在使用過程中應該做到，盡量用干凈的冷 卻水來作為主軸冷 卻循環水。不要圖便宜省事而選用雜質太多的，污濁的水。另外，做到勤更換冷 卻水，不要等水燙手了，再來更換.

Since the main shaft of woodworking engraving machine is easy to block, the engraving machine users should try to use clean cooling water as the main shaft cooling circulating water. Don't try to save money and choose too much impurity, dirty water. In addition, do frequently change the cooling water, do not wait for the water hot, and then change

如果上述辦法沒有解決主軸電機的堵塞問題，一般可以選擇更換 新的主軸電機，大家可以聯系我們選擇購買，我們公司會提供優良的產品和售后服務。

If the above methods do not solve the problem of spindle motor blockage, you can generally choose to replace the new spindle motor, you can contact us to choose to buy, our company will provide excellent products and after-sales service.